Ball nose end mills HPC

1 to 24 of 102 total

Sort By Product Name Set Descending Direction
Ball nose end mills (4-fluted)
Ball nose end mills (4-fluted)
  • Connection code machine side: DIN 6535-HB
    Connection code machine side: DIN 6535-HB
    Connection code machine side: DIN 6535-HB
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: DIN 6527L
    Standard: DIN 6527L
    Standard: DIN 6527L
  • Surface: FIRE
    Surface: FIRE
    Surface: FIRE
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Form: B
    Form: B
    Form: B
  • (Variety): ≤ 48
    (Variety): ≤ 48
    (Variety): ≤ 48
  • Helix angle: 30
    Helix angle: 30
    Helix angle: 30
  • Picto chamfer (Article No.): VR005
    Picto chamfer (Article No.): VR005
    Picto chamfer (Article No.): VR005
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 9
    Picto back rake angle (Article No.): 9
    Picto back rake angle (Article No.): 9
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
  • Picto Copying (Article No.): copying
    Picto Copying (Article No.): copying
    Picto Copying (Article No.): copying
SKU: 5584 Diameter range:
3,000 - 20,000 mm
"Pentru a vedea prețurile, vă rugăm să vă autentificați. Clienții noi pot crea AICI un cont de utilizator sau pot adăuga produsele dorite în coșul de cumpărături și ulterior pot trimite o cerere de ofertă."
Ball nose end mills (4-fluted)
Ball nose end mills (4-fluted)
  • Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
  • Tolerance on Ø: f9
    Tolerance on Ø: f9
    Tolerance on Ø: f9
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: DIN 6528
    Standard: DIN 6528
    Standard: DIN 6528
  • Surface: bright
    Surface: bright
    Surface: bright
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Helix angle: 30
    Helix angle: 30
    Helix angle: 30
  • Picto chamfer (Article No.): VR005
    Picto chamfer (Article No.): VR005
    Picto chamfer (Article No.): VR005
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 9
    Picto back rake angle (Article No.): 9
    Picto back rake angle (Article No.): 9
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
  • Picto Copying (Article No.): copying
    Picto Copying (Article No.): copying
    Picto Copying (Article No.): copying
SKU: 3306 Diameter range:
4,000 - 20,000 mm
"Pentru a vedea prețurile, vă rugăm să vă autentificați. Clienții noi pot crea AICI un cont de utilizator sau pot adăuga produsele dorite în coșul de cumpărături și ulterior pot trimite o cerere de ofertă."
Ball nose end mills (4-fluted)
Ball nose end mills (4-fluted)
  • Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: DIN 6528
    Standard: DIN 6528
    Standard: DIN 6528
  • Surface: FIRE
    Surface: FIRE
    Surface: FIRE
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • (Variety): ≤ 48
    (Variety): ≤ 48
    (Variety): ≤ 48
  • Helix angle: 30
    Helix angle: 30
    Helix angle: 30
  • Picto chamfer (Article No.): VR005
    Picto chamfer (Article No.): VR005
    Picto chamfer (Article No.): VR005
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 9
    Picto back rake angle (Article No.): 9
    Picto back rake angle (Article No.): 9
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
  • Picto Copying (Article No.): copying
    Picto Copying (Article No.): copying
    Picto Copying (Article No.): copying
SKU: 3727 Diameter range:
4,000 - 20,000 mm
"Pentru a vedea prețurile, vă rugăm să vă autentificați. Clienții noi pot crea AICI un cont de utilizator sau pot adăuga produsele dorite în coșul de cumpărături și ulterior pot trimite o cerere de ofertă."
Ball nose end mills (4-fluted)
Ball nose end mills (4-fluted)
  • Connection code machine side: DIN 6535-HB
    Connection code machine side: DIN 6535-HB
    Connection code machine side: DIN 6535-HB
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: DIN 6527L
    Standard: DIN 6527L
    Standard: DIN 6527L
  • Surface: bright
    Surface: bright
    Surface: bright
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Form: B
    Form: B
    Form: B
  • Helix angle: 30
    Helix angle: 30
    Helix angle: 30
  • Picto chamfer (Article No.): VR005
    Picto chamfer (Article No.): VR005
    Picto chamfer (Article No.): VR005
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 9
    Picto back rake angle (Article No.): 9
    Picto back rake angle (Article No.): 9
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
  • Picto Copying (Article No.): copying
    Picto Copying (Article No.): copying
    Picto Copying (Article No.): copying
SKU: 3026 Diameter range:
3,000 - 20,000 mm
"Pentru a vedea prețurile, vă rugăm să vă autentificați. Clienții noi pot crea AICI un cont de utilizator sau pot adăuga produsele dorite în coșul de cumpărături și ulterior pot trimite o cerere de ofertă."
Ball nose end mills (4-fluted)
Ball nose end mills (4-fluted)
  • Connection code machine side: DIN 6535-HB
    Connection code machine side: DIN 6535-HB
    Connection code machine side: DIN 6535-HB
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: DIN 6527L
    Standard: DIN 6527L
    Standard: DIN 6527L
  • Surface: FIRE
    Surface: FIRE
    Surface: FIRE
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Form: B
    Form: B
    Form: B
  • (Variety): ≤ 48
    (Variety): ≤ 48
    (Variety): ≤ 48
  • Helix angle: 30
    Helix angle: 30
    Helix angle: 30
  • Picto chamfer (Article No.): VR005
    Picto chamfer (Article No.): VR005
    Picto chamfer (Article No.): VR005
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 9
    Picto back rake angle (Article No.): 9
    Picto back rake angle (Article No.): 9
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
  • Picto Copying (Article No.): copying
    Picto Copying (Article No.): copying
    Picto Copying (Article No.): copying
SKU: 3050 Diameter range:
3,000 - 20,000 mm
"Pentru a vedea prețurile, vă rugăm să vă autentificați. Clienții noi pot crea AICI un cont de utilizator sau pot adăuga produsele dorite în coșul de cumpărături și ulterior pot trimite o cerere de ofertă."
Ball nose end mills (4-fluted)
Ball nose end mills (4-fluted)
  • Connection code machine side: straight shank
    Connection code machine side: straight shank
    Connection code machine side: straight shank
  • Tolerance on Ø: f9
    Tolerance on Ø: f9
    Tolerance on Ø: f9
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: bright
    Surface: bright
    Surface: bright
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Helix angle: 30
    Helix angle: 30
    Helix angle: 30
  • Picto chamfer (Article No.): VR005
    Picto chamfer (Article No.): VR005
    Picto chamfer (Article No.): VR005
  • Picto Drilling (Article No.): drilling
    Picto Drilling (Article No.): drilling
    Picto Drilling (Article No.): drilling
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 9
    Picto back rake angle (Article No.): 9
    Picto back rake angle (Article No.): 9
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
  • Picto Copying (Article No.): copying
    Picto Copying (Article No.): copying
    Picto Copying (Article No.): copying
SKU: 3161 Diameter range:
1,590 - 25,400 mm
"Pentru a vedea prețurile, vă rugăm să vă autentificați. Clienții noi pot crea AICI un cont de utilizator sau pot adăuga produsele dorite în coșul de cumpărături și ulterior pot trimite o cerere de ofertă."
Ball nose end mills (4-fluted)
Ball nose end mills (4-fluted)
  • Connection code machine side: straight shank
    Connection code machine side: straight shank
    Connection code machine side: straight shank
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: FIRE
    Surface: FIRE
    Surface: FIRE
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 6+
    No of cutting edges: 6+
    No of cutting edges: 6+
  • Helix angle: 30
    Helix angle: 30
    Helix angle: 30
  • Picto chamfer (Article No.): VR005
    Picto chamfer (Article No.): VR005
    Picto chamfer (Article No.): VR005
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 9
    Picto back rake angle (Article No.): 9
    Picto back rake angle (Article No.): 9
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
  • Picto Copying (Article No.): copying
    Picto Copying (Article No.): copying
    Picto Copying (Article No.): copying
SKU: 3165 Diameter range:
1,590 - 25,400 mm
"Pentru a vedea prețurile, vă rugăm să vă autentificați. Clienții noi pot crea AICI un cont de utilizator sau pot adăuga produsele dorite în coșul de cumpărături și ulterior pot trimite o cerere de ofertă."
Ball nose end mills (4-fluted)
Ball nose end mills (4-fluted)
  • Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: Cristall C
    Surface: Cristall C
    Surface: Cristall C
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Helix angle: 30
    Helix angle: 30
    Helix angle: 30
  • Picto chamfer (Article No.): VR005
    Picto chamfer (Article No.): VR005
    Picto chamfer (Article No.): VR005
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): extra long
    Picto lenght (Article No.): extra long
    Picto lenght (Article No.): extra long
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 9
    Picto back rake angle (Article No.): 9
    Picto back rake angle (Article No.): 9
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
  • Picto Copying (Article No.): copying
    Picto Copying (Article No.): copying
    Picto Copying (Article No.): copying
SKU: 6725 Diameter range:
3,000 - 12,000 mm
"Pentru a vedea prețurile, vă rugăm să vă autentificați. Clienții noi pot crea AICI un cont de utilizator sau pot adăuga produsele dorite în coșul de cumpărături și ulterior pot trimite o cerere de ofertă."
Ball nose end mills (4-fluted)
Ball nose end mills (4-fluted)
  • Connection code machine side: straight shank
    Connection code machine side: straight shank
    Connection code machine side: straight shank
  • Tolerance on Ø: f9
    Tolerance on Ø: f9
    Tolerance on Ø: f9
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: bright
    Surface: bright
    Surface: bright
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Helix angle: 30
    Helix angle: 30
    Helix angle: 30
  • Picto chamfer (Article No.): VR005
    Picto chamfer (Article No.): VR005
    Picto chamfer (Article No.): VR005
  • Picto lenght (Article No.): extra long
    Picto lenght (Article No.): extra long
    Picto lenght (Article No.): extra long
  • Picto back rake angle (Article No.): 9
    Picto back rake angle (Article No.): 9
    Picto back rake angle (Article No.): 9
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
  • Picto Copying (Article No.): copying
    Picto Copying (Article No.): copying
    Picto Copying (Article No.): copying
SKU: 3162 Diameter range:
4,763 - 19,050 mm
"Pentru a vedea prețurile, vă rugăm să vă autentificați. Clienții noi pot crea AICI un cont de utilizator sau pot adăuga produsele dorite în coșul de cumpărături și ulterior pot trimite o cerere de ofertă."
Ball nose end mills XL (4-fluted)
Ball nose end mills XL (4-fluted)
  • Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
  • Tolerance on Ø: f9
    Tolerance on Ø: f9
    Tolerance on Ø: f9
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: bright
    Surface: bright
    Surface: bright
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Helix angle: 30
    Helix angle: 30
    Helix angle: 30
  • Picto chamfer (Article No.): VR005
    Picto chamfer (Article No.): VR005
    Picto chamfer (Article No.): VR005
  • Picto lenght (Article No.): extra long
    Picto lenght (Article No.): extra long
    Picto lenght (Article No.): extra long
  • Picto back rake angle (Article No.): 9
    Picto back rake angle (Article No.): 9
    Picto back rake angle (Article No.): 9
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
  • Picto Copying (Article No.): copying
    Picto Copying (Article No.): copying
    Picto Copying (Article No.): copying
SKU: 3015 Diameter range:
3,000 - 12,000 mm
"Pentru a vedea prețurile, vă rugăm să vă autentificați. Clienții noi pot crea AICI un cont de utilizator sau pot adăuga produsele dorite în coșul de cumpărături și ulterior pot trimite o cerere de ofertă."
Ball nose end mills XL (4-fluted)
Ball nose end mills XL (4-fluted)
  • Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: FIRE
    Surface: FIRE
    Surface: FIRE
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Helix angle: 30
    Helix angle: 30
    Helix angle: 30
  • Picto chamfer (Article No.): VR005
    Picto chamfer (Article No.): VR005
    Picto chamfer (Article No.): VR005
  • Picto lenght (Article No.): extra long
    Picto lenght (Article No.): extra long
    Picto lenght (Article No.): extra long
  • Picto back rake angle (Article No.): 9
    Picto back rake angle (Article No.): 9
    Picto back rake angle (Article No.): 9
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
  • Picto Copying (Article No.): copying
    Picto Copying (Article No.): copying
    Picto Copying (Article No.): copying
SKU: 3043 Diameter range:
3,000 - 12,000 mm
"Pentru a vedea prețurile, vă rugăm să vă autentificați. Clienții noi pot crea AICI un cont de utilizator sau pot adăuga produsele dorite în coșul de cumpărături și ulterior pot trimite o cerere de ofertă."
Ball nose end mills XL (4-fluted)
Ball nose end mills XL (4-fluted)
  • Connection code machine side: straight shank
    Connection code machine side: straight shank
    Connection code machine side: straight shank
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: FIRE
    Surface: FIRE
    Surface: FIRE
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Helix angle: 30
    Helix angle: 30
    Helix angle: 30
  • Picto chamfer (Article No.): VR005
    Picto chamfer (Article No.): VR005
    Picto chamfer (Article No.): VR005
  • Picto lenght (Article No.): extra long
    Picto lenght (Article No.): extra long
    Picto lenght (Article No.): extra long
  • Picto back rake angle (Article No.): 9
    Picto back rake angle (Article No.): 9
    Picto back rake angle (Article No.): 9
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
  • Picto Copying (Article No.): copying
    Picto Copying (Article No.): copying
    Picto Copying (Article No.): copying
SKU: 3166 Diameter range:
4,763 - 19,050 mm
"Pentru a vedea prețurile, vă rugăm să vă autentificați. Clienții noi pot crea AICI un cont de utilizator sau pot adăuga produsele dorite în coșul de cumpărături și ulterior pot trimite o cerere de ofertă."
Ball nose hard profile cutters GF 300 B
Ball nose hard profile cutters GF 300 B
  • Connection code machine side: straight shank
    Connection code machine side: straight shank
    Connection code machine side: straight shank
  • Tolerance on Ø: h8
    Tolerance on Ø: h8
    Tolerance on Ø: h8
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: Signum
    Surface: Signum
    Surface: Signum
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: H
    Type: H
    Type: H
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide