HPC high-performance milling cutters

1 to 24 of 75 total

Sort By Product Name Set Descending Direction
Finishing end mills G-Mold 65 F
  • Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
  • Tolerance on Ø: f9
    Tolerance on Ø: f9
    Tolerance on Ø: f9
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: Signum
    Surface: Signum
    Surface: Signum
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: H
    Type: H
    Type: H
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 6
    No of cutting edges: 6
    No of cutting edges: 6
  • (Variety): ≤ 65
    (Variety): ≤ 65
    (Variety): ≤ 65
  • Helix angle: 42
    Helix angle: 42
    Helix angle: 42
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto back rake angle (Article No.): -3
    Picto back rake angle (Article No.): -3
    Picto back rake angle (Article No.): -3
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
SKU: 6945 Diameter range:
3,000 - 20,000 mm
"Pentru a vedea prețurile, vă rugăm să vă autentificați. Clienții noi pot crea AICI un cont de utilizator sau pot adăuga produsele dorite în coșul de cumpărături și ulterior pot trimite o cerere de ofertă."
Finishing end mills G-Mold 65 F
  • Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
  • Tolerance on Ø: f9
    Tolerance on Ø: f9
    Tolerance on Ø: f9
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: Signum
    Surface: Signum
    Surface: Signum
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: H
    Type: H
    Type: H
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 6
    No of cutting edges: 6
    No of cutting edges: 6
  • (Variety): ≤ 65
    (Variety): ≤ 65
    (Variety): ≤ 65
  • Helix angle: 42
    Helix angle: 42
    Helix angle: 42
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto lenght (Article No.): extra long
    Picto lenght (Article No.): extra long
    Picto lenght (Article No.): extra long
  • Picto back rake angle (Article No.): -3
    Picto back rake angle (Article No.): -3
    Picto back rake angle (Article No.): -3
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
SKU: 6946 Diameter range:
3,000 - 20,000 mm
"Pentru a vedea prețurile, vă rugăm să vă autentificați. Clienții noi pot crea AICI un cont de utilizator sau pot adăuga produsele dorite în coșul de cumpărături și ulterior pot trimite o cerere de ofertă."
Hard multi-tooth end mills GH 100 H
  • Connection code machine side: ~DIN 6535-HA
    Connection code machine side: ~DIN 6535-HA
    Connection code machine side: ~DIN 6535-HA
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: Signum
    Surface: Signum
    Surface: Signum
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: H
    Type: H
    Type: H
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 6+
    No of cutting edges: 6+
    No of cutting edges: 6+
  • (Variety): ≤ 63
    (Variety): ≤ 63
    (Variety): ≤ 63
  • Helix angle: 55
    Helix angle: 55
    Helix angle: 55
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto back rake angle (Article No.): -7
    Picto back rake angle (Article No.): -7
    Picto back rake angle (Article No.): -7
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
SKU: 3182 Diameter range:
6,350 - 19,050 mm
"Pentru a vedea prețurile, vă rugăm să vă autentificați. Clienții noi pot crea AICI un cont de utilizator sau pot adăuga produsele dorite în coșul de cumpărături și ulterior pot trimite o cerere de ofertă."
Hard multi-tooth end mills GH 100 H
  • Connection code machine side: ~DIN 6535-HA
    Connection code machine side: ~DIN 6535-HA
    Connection code machine side: ~DIN 6535-HA
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: Signum
    Surface: Signum
    Surface: Signum
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: H
    Type: H
    Type: H
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 6+
    No of cutting edges: 6+
    No of cutting edges: 6+
  • (Variety): ≤ 63
    (Variety): ≤ 63
    (Variety): ≤ 63
  • Helix angle: 55
    Helix angle: 55
    Helix angle: 55
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto lenght (Article No.): medium
    Picto lenght (Article No.): medium
    Picto lenght (Article No.): medium
  • Picto back rake angle (Article No.): -7
    Picto back rake angle (Article No.): -7
    Picto back rake angle (Article No.): -7
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
SKU: 3183 Diameter range:
6,350 - 19,050 mm
"Pentru a vedea prețurile, vă rugăm să vă autentificați. Clienții noi pot crea AICI un cont de utilizator sau pot adăuga produsele dorite în coșul de cumpărături și ulterior pot trimite o cerere de ofertă."
Hard multi-tooth end mills GH 100 H
  • Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: Signum
    Surface: Signum
    Surface: Signum
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: H
    Type: H
    Type: H
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 6+
    No of cutting edges: 6+
    No of cutting edges: 6+
  • (Variety): ≤ 63
    (Variety): ≤ 63
    (Variety): ≤ 63
  • Helix angle: 55
    Helix angle: 55
    Helix angle: 55
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto back rake angle (Article No.): -7
    Picto back rake angle (Article No.): -7
    Picto back rake angle (Article No.): -7
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
SKU: 3715 Diameter range:
3,000 - 20,000 mm
"Pentru a vedea prețurile, vă rugăm să vă autentificați. Clienții noi pot crea AICI un cont de utilizator sau pot adăuga produsele dorite în coșul de cumpărături și ulterior pot trimite o cerere de ofertă."
Hard multi-tooth end mills GH 100 H
  • Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: Signum
    Surface: Signum
    Surface: Signum
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: H
    Type: H
    Type: H
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 6+
    No of cutting edges: 6+
    No of cutting edges: 6+
  • (Variety): ≤ 63
    (Variety): ≤ 63
    (Variety): ≤ 63
  • Helix angle: 55
    Helix angle: 55
    Helix angle: 55
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto lenght (Article No.): extra long
    Picto lenght (Article No.): extra long
    Picto lenght (Article No.): extra long
  • Picto back rake angle (Article No.): -7
    Picto back rake angle (Article No.): -7
    Picto back rake angle (Article No.): -7
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
SKU: 3716 Diameter range:
6,000 - 20,000 mm
"Pentru a vedea prețurile, vă rugăm să vă autentificați. Clienții noi pot crea AICI un cont de utilizator sau pot adăuga produsele dorite în coșul de cumpărături și ulterior pot trimite o cerere de ofertă."
Hard roughing end mills GS 100 H (fine teeth)
  • Connection code machine side: ~DIN 6535-HA
    Connection code machine side: ~DIN 6535-HA
    Connection code machine side: ~DIN 6535-HA
  • Tolerance on Ø: h11
    Tolerance on Ø: h11
    Tolerance on Ø: h11
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: FIRE
    Surface: FIRE
    Surface: FIRE
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: HR
    Type: HR
    Type: HR
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Helix angle: 20
    Helix angle: 20
    Helix angle: 20
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 3
    Picto back rake angle (Article No.): 3
    Picto back rake angle (Article No.): 3
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
SKU: 3189 Diameter range:
6,350 - 19,050 mm
"Pentru a vedea prețurile, vă rugăm să vă autentificați. Clienții noi pot crea AICI un cont de utilizator sau pot adăuga produsele dorite în coșul de cumpărături și ulterior pot trimite o cerere de ofertă."
Hard roughing end mills GS 100 H (fine teeth)
  • Connection code machine side: ~DIN 6535-HA
    Connection code machine side: ~DIN 6535-HA
    Connection code machine side: ~DIN 6535-HA
  • Tolerance on Ø: h11
    Tolerance on Ø: h11
    Tolerance on Ø: h11
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: FIRE
    Surface: FIRE
    Surface: FIRE
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: HR
    Type: HR
    Type: HR
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Helix angle: 20
    Helix angle: 20
    Helix angle: 20
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): extra long
    Picto lenght (Article No.): extra long
    Picto lenght (Article No.): extra long
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 3
    Picto back rake angle (Article No.): 3
    Picto back rake angle (Article No.): 3
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
SKU: 3190 Diameter range:
6,350 - 19,050 mm
"Pentru a vedea prețurile, vă rugăm să vă autentificați. Clienții noi pot crea AICI un cont de utilizator sau pot adăuga produsele dorite în coșul de cumpărături și ulterior pot trimite o cerere de ofertă."
Hard roughing end mills GS 100 H (fine teeth)
  • Connection code machine side: DIN 6535-HB
    Connection code machine side: DIN 6535-HB
    Connection code machine side: DIN 6535-HB
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: DIN 6527L
    Standard: DIN 6527L
    Standard: DIN 6527L
  • Surface: Signum
    Surface: Signum
    Surface: Signum
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: HR
    Type: HR
    Type: HR
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Form: B
    Form: B
    Form: B
  • (Variety): ≤ 55
    (Variety): ≤ 55
    (Variety): ≤ 55
  • Helix angle: 20
    Helix angle: 20
    Helix angle: 20
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 3
    Picto back rake angle (Article No.): 3
    Picto back rake angle (Article No.): 3
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
SKU: 5583 Diameter range:
6,000 - 20,000 mm
"Pentru a vedea prețurile, vă rugăm să vă autentificați. Clienții noi pot crea AICI un cont de utilizator sau pot adăuga produsele dorite în coșul de cumpărături și ulterior pot trimite o cerere de ofertă."
Hard roughing end mills GS 100 H (fine teeth)
  • Connection code machine side: DIN 6535-HB
    Connection code machine side: DIN 6535-HB
    Connection code machine side: DIN 6535-HB
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: DIN 6527L
    Standard: DIN 6527L
    Standard: DIN 6527L
  • Surface: Signum
    Surface: Signum
    Surface: Signum
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: HR
    Type: HR
    Type: HR
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Form: B
    Form: B
    Form: B
  • (Variety): ≤ 55
    (Variety): ≤ 55
    (Variety): ≤ 55
  • Helix angle: 20
    Helix angle: 20
    Helix angle: 20
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 3
    Picto back rake angle (Article No.): 3
    Picto back rake angle (Article No.): 3
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
SKU: 3682 Diameter range:
6,000 - 20,000 mm
"Pentru a vedea prețurile, vă rugăm să vă autentificați. Clienții noi pot crea AICI un cont de utilizator sau pot adăuga produsele dorite în coșul de cumpărături și ulterior pot trimite o cerere de ofertă."
Hard roughing end mills GS 100 H (fine teeth)
  • Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: with
    Internal cooling: with
    Internal cooling: with
  • Standard: DIN 6527L
    Standard: DIN 6527L
    Standard: DIN 6527L
  • Surface: Signum
    Surface: Signum
    Surface: Signum
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: HR
    Type: HR
    Type: HR
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Form: A
    Form: A
    Form: A
  • (Variety): ≤ 55
    (Variety): ≤ 55
    (Variety): ≤ 55
  • Helix angle: 20
    Helix angle: 20
    Helix angle: 20
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 3
    Picto back rake angle (Article No.): 3
    Picto back rake angle (Article No.): 3
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
SKU: 6704 Diameter range:
6,000 - 25,000 mm
"Pentru a vedea prețurile, vă rugăm să vă autentificați. Clienții noi pot crea AICI un cont de utilizator sau pot adăuga produsele dorite în coșul de cumpărături și ulterior pot trimite o cerere de ofertă."
Hard roughing end mills GS 100 H (fine teeth)
  • Connection code machine side: DIN 6535-HB
    Connection code machine side: DIN 6535-HB
    Connection code machine side: DIN 6535-HB
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: with
    Internal cooling: with
    Internal cooling: with
  • Standard: DIN 6527L
    Standard: DIN 6527L
    Standard: DIN 6527L
  • Surface: Signum
    Surface: Signum
    Surface: Signum
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: HR
    Type: HR
    Type: HR
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Form: B
    Form: B
    Form: B
  • (Variety): ≤ 55
    (Variety): ≤ 55
    (Variety): ≤ 55
  • Helix angle: 20
    Helix angle: 20
    Helix angle: 20
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 3
    Picto back rake angle (Article No.): 3
    Picto back rake angle (Article No.): 3
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
SKU: 6705 Diameter range:
6,000 - 25,000 mm
"Pentru a vedea prețurile, vă rugăm să vă autentificați. Clienții noi pot crea AICI un cont de utilizator sau pot adăuga produsele dorite în coșul de cumpărături și ulterior pot trimite o cerere de ofertă."
High precision finishing end mills G-Mold µ 48 F
  • Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
  • Tolerance on Ø: f8
    Tolerance on Ø: f8
    Tolerance on Ø: f8
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: Perrox
    Surface: Perrox
    Surface: Perrox
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: NH
    Type: NH
    Type: NH
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4-6
    No of cutting edges: 4-6
    No of cutting edges: 4-6
  • (Variety): ≤ 48
    (Variety): ≤ 48
    (Variety): ≤ 48
  • Helix angle: 40
    Helix angle: 40
    Helix angle: 40
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45